| Availability: | |
|---|---|
| Quantity: | |
Feihong
Product Overview
The Feihong Humanoid Robot Dynamic Testing Platform simulates level walking and inclined road conditions to test walking speed, slope traversal and motion endurance. It combines servo closed-loop drive with electric incline adjustment and supports touchscreen, handheld remote and RS485 host-computer control.
Main Test Functions
• Electric incline adjustment from 0° to 30°.
• Stepless speed adjustment from 10 to 40 km/h, with forward and reverse operation.
• Gantry lifting mechanism with safety-rope attachment points.
• Touchscreen display of time, incline, speed and distance.
• Handheld remote for speed, incline and emergency stop.
• RS485 host-computer command control for unattended test execution.
• Automatic reset of test items when the set time expires.
• Adaptation to bipedal gait conditions without balance assistance.
Technical Specifications
Applicable robot types: The source specification table lists quadruped and wheel-legged robots, while its overview describes bipedal testing; confirm compatibility before use.
Test conditions: Level walking surface and 0°–30° incline.
Effective treadmill area: 2 m × 1.25 m.
Maximum load capacity: ≥350 kg.
Overall dimensions: approximately 2300 × 1400 × 27500 mm, excluding gantry (value as published on the source page; please verify).
Control cabinet dimensions: approximately 750 × 600 × 1460 mm.
Incline range: 0°–30°, electrically adjusted.
Speed range: 10–40 km/h, reverse operation supported.
Distance accuracy: ±1%.
Speed resolution: 0.01 km/h.
Speed sampling frequency: 10 Hz.
Load method: sandbags and calibration weights.
Total test load: 300 kg; ten 25 kg sandbags and five 10 kg sandbags; individual sandbag accuracy ±0.5 kg.
Drive: servo closed loop with speed feedback.
Running belt: PVC and anti-slip metal fabric.
Safety: side fall-prevention rails and dual emergency-stop protection.
Control: touchscreen, remote control and RS485 host computer.
Electrical configuration: 380 V ±15%; leakage-protection device ≥60 A.
No-load noise: <80 dB.
Reference standards listed by source: GB/T 44251-2024 and ISO 18646-5:2026.
Applications
For robot walking-speed, slope-traversal and endurance testing under level and inclined treadmill conditions. Confirm the intended robot type and installation dimensions against the final equipment configuration.
Inside a Pickleball Paddle PBCOR Test Lab: From Launch Speed to Repeatable Results
How to Test Robot Dog Stair-Climbing Ability on an Adjustable Platform
Surviving the Torture Test – How We Validate MTB Frame & Fork Fatigue Before It Hits the Dirt
How to Test Caster Durability, Rolling Resistance and Brake Life
How to Choose a Humanoid Robot Test Bench: From Joint Performance to Walking Reliability